VENDO FOCUSRITE SAFFIRE ``IMPECABLE 250 ´´-interfaz de audio firewire(la blanca)
Categoría: Compra - Venta
Subcategoría: Otras ventas
Subcategoría: Otras ventas
Precio:
Llame para el precio
- o -
Contactar al proveedor
Descripción VENDO FOCUSRITE SAFFIRE ``IMPECABLE 250 ´´-interfaz de audio firewire(la blanca)
Contacto
SpecificationsSYSTEM REQUIREMENTS, PERFORMANCE AND SPECIFICATIONWINDOWSOperating System
• Windows® XP Service Pack 2 (Home, Professional, 64bit XP or Media Centre Edition) or Windows Vista (32bit and 64bit - all versions)Computer
• Windows® XP compatible PC
• 400Mb/s IEEE1394/FireWire port (OHCI compliant recommended)CPU/Clock
• 1.4 GHz Intel or compatible
• 2.0 GHz Pentium© 4 or Xeon recommended for 192kHz operationMemory (RAM)
• 256MB or more
• 512MB or higher recommendedAPPLE MACOperating System
• Mac OS X Panther (10.3.3 or later) - Mac OS update may be requiredComputer
• Apple Mac Power PC G4, G5 or Intel Mac (any)CPU/Clock
• G4/800 MHz (minimum)
• G4/1.5GHZ or higher recommended for 192kHz operationMemory (RAM)
• 256MB or more
• 512MB or higher recommendedADDITIONAL INFO
• Firewire chipsets from TI (Texas Instruments), VIA, and NEC are recommended
• It is highly recommended that Saffire be run on its own Firewire bus/card
• In order to use Saffire with a 4-pin IEEE1394 port you will need a 4-pin to 6-pin cable (not included) and must use the PSU (included)Mic
• Frequency Response: 20Hz - 20kHz +/- 0.1 dB
• THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
• Noise: EIN > 120dB (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)Line
• Frequency Response: 20Hz - 20kHz +/- 0.1dB
• THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
• Noise: -88dBu (22Hz/22kHz bandpass filter)Instrument
• Frequency Response: 20Hz - 20kHz +/- 0.1dB
• THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
• Noise: -87dBu (20Hz/22kHz bandpass filter)Digital Performance
• Clock Source: Internal clock or sync to word clock on SPDIF
• A/D Dynamic Range 104dB 'A-weighted'
• D/A Dynamic Range 110dB ?A-weighted'
• Clock Jitter
• Sample rate 44.1 to 192kHzWeight
• 1.1kg
• 2.4IbsDimensions
• 65mm (W) x 170mm (H) x 170mm (D)
• 2.6" (W) x 6.7" (H) x 6.7" (D)Analogue inputs
• Mic: 2 x XLR on front panel
• Mic Gain: +13dB to + 60dB
• Line: 2 x 1/4" TRS Jack
• Line Gain: -10dB to +36dB
• Instrument: As above, switched to Instrument
• Instrument Gain: +13dB to +60dBAnalogue outputs
• Line level 8 x 1/4" TRS Jack
• Nominal output level 0dBFS = 16dBu, electronically balanced
• All outputs are useable as monitoring outputsDigital I/O
• 2 x SPDIF (RCA phono) on rear panel (24-bit, 96kHz) Output transformer isolatedMIDI I/O
• 1 in / 1 out on rear panelFirewireS400
• 2 portsPower
• Either via FIREWIRE or external PSU (12v AC, 1.5A)Headphone Monitoring
• 2 x 1/4" TRS Jack on front panel (mirrors outputs 5-8)
• Windows® XP Service Pack 2 (Home, Professional, 64bit XP or Media Centre Edition) or Windows Vista (32bit and 64bit - all versions)Computer
• Windows® XP compatible PC
• 400Mb/s IEEE1394/FireWire port (OHCI compliant recommended)CPU/Clock
• 1.4 GHz Intel or compatible
• 2.0 GHz Pentium© 4 or Xeon recommended for 192kHz operationMemory (RAM)
• 256MB or more
• 512MB or higher recommendedAPPLE MACOperating System
• Mac OS X Panther (10.3.3 or later) - Mac OS update may be requiredComputer
• Apple Mac Power PC G4, G5 or Intel Mac (any)CPU/Clock
• G4/800 MHz (minimum)
• G4/1.5GHZ or higher recommended for 192kHz operationMemory (RAM)
• 256MB or more
• 512MB or higher recommendedADDITIONAL INFO
• Firewire chipsets from TI (Texas Instruments), VIA, and NEC are recommended
• It is highly recommended that Saffire be run on its own Firewire bus/card
• In order to use Saffire with a 4-pin IEEE1394 port you will need a 4-pin to 6-pin cable (not included) and must use the PSU (included)Mic
• Frequency Response: 20Hz - 20kHz +/- 0.1 dB
• THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
• Noise: EIN > 120dB (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)Line
• Frequency Response: 20Hz - 20kHz +/- 0.1dB
• THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
• Noise: -88dBu (22Hz/22kHz bandpass filter)Instrument
• Frequency Response: 20Hz - 20kHz +/- 0.1dB
• THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
• Noise: -87dBu (20Hz/22kHz bandpass filter)Digital Performance
• Clock Source: Internal clock or sync to word clock on SPDIF
• A/D Dynamic Range 104dB 'A-weighted'
• D/A Dynamic Range 110dB ?A-weighted'
• Clock Jitter
• Sample rate 44.1 to 192kHzWeight
• 1.1kg
• 2.4IbsDimensions
• 65mm (W) x 170mm (H) x 170mm (D)
• 2.6" (W) x 6.7" (H) x 6.7" (D)Analogue inputs
• Mic: 2 x XLR on front panel
• Mic Gain: +13dB to + 60dB
• Line: 2 x 1/4" TRS Jack
• Line Gain: -10dB to +36dB
• Instrument: As above, switched to Instrument
• Instrument Gain: +13dB to +60dBAnalogue outputs
• Line level 8 x 1/4" TRS Jack
• Nominal output level 0dBFS = 16dBu, electronically balanced
• All outputs are useable as monitoring outputsDigital I/O
• 2 x SPDIF (RCA phono) on rear panel (24-bit, 96kHz) Output transformer isolatedMIDI I/O
• 1 in / 1 out on rear panelFirewireS400
• 2 portsPower
• Either via FIREWIRE or external PSU (12v AC, 1.5A)Headphone Monitoring
• 2 x 1/4" TRS Jack on front panel (mirrors outputs 5-8)
